Starter kit for ecomatController EC2121
39
6
Annex
Content
The I/O simulator box .............................................................................................................................39
57296
>
6.1
The I/O simulator box
57297
The I/O simulator box is used for the simulation of input and output signals and the reset of
communication parameters of the controller. Six inputs and outputs each are connected via the box.
>
6.1.1
Inputs
57298
The input circuit is shown in the image below using [IN0100] as example.
The following modes can be simulated on the inputs:
binary input (IN_DIGITAL_CSI)
voltage measurement 0...10 V (IN_VOLTAGE_10)
