5
5.
Enter vendor ID and device ID to ensure that only an IO-Link
Display 1,44” can be operated at that port.
6.
Set the data storage according to the application's requirements:
7.
Write the configuration to the controller or PLC.
8.
Connect the IO-Link Display to the master using a 3-wire cable.
3.
Parameter setting (acyclic communication)
Settings can be made and predefined text can be entered by
means of the IO-Link parameter setting tool or a PLC by writing
the corresponding parameters.
The LINERECORDER DEVICE can for example be used as
IODD-based parameter setting tool (
→
3.1).
It is possible to configure the following properties:
•
Process value display (unit, description text, decimal places)
→
3.2
•
Text content for info pages
→
3.3
•
Background colour of the info page
→
3.4
•
Text instead of process values
→
3.5;
→
0
•
Display layout
→
3.7
•
Content of a QR code
→
3.8
The process values, colours and layout switching are controlled
via the cyclic communication of the controlling PLC. (
→
4 )
