background image

3

UK

1  Preliminary note

Technical data, approvals, accessories and further information at www�ifm�com

1.1  Symbols used

Instructions

>

Reaction or result

[…] Designation of keys, buttons or indications

Cross-reference

Important note 

Non-compliance may result in malfunction or interference�

Information 

Supplementary note

2  Safety instructions

•  Read this document before setting up the product and keep it during the entire 

service life�

•  The product must be suitable for the corresponding applications and 

environmental conditions without any restrictions�

• 

Only use the product for its intended purpose (→ Functions and features).

• 

Only use the product for permissible media (→ Technical data).

•  If the operating instructions or the technical data are not adhered to, personal 

injury and/or damage to property can occur� 

•  The manufacturer assumes no liability or warranty for any consequences 

caused by tampering with the product or incorrect use by the operator�

•  Installation, electrical connection, set-up, operation and maintenance of the 

product must be carried out by qualified personnel authorised by the machine 

operator�

• 

The device and the accessories (e.g. cable) must be effectively protected 

against damage�

Summary of Contents for E30390








Reviews: