IFM DTM434 Operating Instructions Manual Download Page 23

Page: 23 / 39

DTM434 DTM435

9.1.7 Error messages

The device supports a number of error messages that are sent in the event of a communication,
hardware or RFID error. If one of these errors occurs, the error register (OV index 0x1001) and the
error field (OV index 0x1003) are updated.

The

COB

ID of the emergency message can be changed in the object “COB ID EMCY” (OV index

0x1014). By setting bit 31 in this object the emergency messages are deactivated.

The disable time between two emergency messages can be defined via the object 0x1015. The
indication is made in steps of 100 µs.

The COB ID of the emergency messages is preset to 0x80 +

Node ID

Error message

Error register
(0x1001)

Manufacturer error
code

Manufacturer error
name

Description

0x8210

0x11

Protocol: PDO not pro-
cessed due to length
error.

0x8130

0x01

Monitoring: Node
guarding or Heartbeat
error

0x8100

0x11

Monitoring: general
communication error
when sending "Bus off”

0x5000

0x81

0x01

Device hardware error
(antenna error)

0x4200

0x09

0x02

Device temperature too
high

0xFF00

0x81

0x01

RX: ISO_COM-
MAND_ER-
ROR_NO_RESPONSE

ID tag did not answer.
Possibly the ID tag is
no longer in the field.

0xFF00

0x81

0x02

RX: ISO_COM-
MAND_ER-
ROR_RX_ERROR

Error while receiving
the answer from the ID
tag (CRC error, framing
error, collision, etc.).

0xFF01

0x81

0x01

TX: ISO_COM-
MAND_ER-
ROR_NO_RESPONSE

ID tag did not answer.
Possibly the ID tag is
no longer in the field.

0xFF01

0x81

0x02

TX: ISO_COM-
MAND_ER-
ROR_RX_ERROR

Error while sending the
answer from the ID tag
(CRC error, framing er-
ror, collision, etc.).

0xFF02

0x81

0x01

ISO_TAG_ER-
ROR_COM-
MAND_NOT_SPECI-
FIED

The command is not
supported. Possible
reason: faulty com-
mand.

0xFF02

0x81

0x02

ISO_TAG_ER-
ROR_COM-
MAND_SYNTAX

The command is not
detected. Possible rea-
son: Number of sec-
tions is too high. For-
mat error.

0xFF02

0x81

0x03

ISO_TAG_ER-
ROR_OP-
TION_NOT_SUP-
PORTED

Indicated options are
not supported.

0xFF02

0x81

0x0F

ISO_TAG_ER-
ROR_OTHER

Other error.

0xFF02

0x81

0x10

ISO_TAG_ER-
ROR_BLOCK_NOT_U
SABLE

The specified section
cannot be used (or was
not found).

Summary of Contents for DTM434








































Search results

Summary of Contents for DTM434

Reviews:

Related manuals for DTM434

Brands by name

Popular brands

IFM DTM434, Operating Instructions Manual

Search results

Summary of Contents for DTM434

Reviews:

Related manuals for DTM434

Brands by name

Popular brands