RFID UHF Reader
DTE830 DTE930 DTE939
19
10 Approvals/standards
10.1 CE labelling
The device complies with the requirements to CE.
Brand name: ifm electronic DTE830 RFID UHF reader for Europe
The device is designed for operation in accordance with EN 302208. When operating the device with
connected antennas, observe the human exposure regulations to EN 50364. Ensure a minimum
distance of 23 cm between antenna and people. During operation, cardiac pacemakers may be
impaired. In case of doubt, persons concerned should consult the manufacturer of the pacemaker or
the attending doctor.
The output power of the device can be reduced depending on the antenna cable length and the
antenna gain.
10.2 FCC labelling
The device complies with the requirements to FCC Part 15.
Brand name: ifm electronic DTE930 RFID UHF reader for US (FCC)
The device is designed for operation in accordance with FCC Part 15.
w
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
u
This device may not cause harmful interference.
u
This device must accept any interference received including interference that may cause
undesired operation.
The device complies with the FCC limits for radiation exposure in a non-controlled environment:
Ensure a minimum distance of 23 cm between antenna and people.
To comply with FCC Part 15 regulations in the United States, the system must be properly installed.
The operator and the installer have to ensure that only certified systems are applied in the United
States.
10.3 ISED Canada Regulatory Information
The device complies with ISED RSS standards (Radio Standards Specifications) for licence-exempt
radio apparatus.
Brand name: ifm electronic DTE930 RFID UHF reader for Canada
Operation is subject to the following two conditions:
(1) the device may not cause interference and
(2) the device must accept any interference received including interference that may cause undesired
operation.
Under ISED regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by ISED.
u
To reduce potential radio interference to other users, choose the antenna type and its gain such
that the equivalent isotopically radiated power (EIRP) is not more than that necessary for
successful communication.
This radio transmitter has been approved by ISED to operate with the antenna types listed as
accessories, with the maximum permissible gain and required antenna impedance for each antenna
type indicated.
