IFM DTC510 Operating Instructions Manual Download Page 6 | Manualshive

Page: 6 / 61

background image

6

3 Intended use

The read/write head reads and writes

without contact.

The data is made available as process data via the

interface.

4 Items supplied

• Read/write head

The device is supplied without installation and connection accessories.
Available accessories:

The optimum function is not ensured when using components from other
manufacturers.

5 Function

5.1 ID tags

are passively operated without a battery. The energy required for

operation is provided by the read/write head.

The energy is provided via an inductive coupling. The integrated antenna coil in
the read/write head generates a magnetic field which partly penetrates the
antenna coil of the ID tag. A voltage is generated by induction that supplies the
data carrier with energy.

The device supports ID tags according to ISO 15693.

5.2 CANopen technology

communication profile is based on the

Application Layer

(CAL) specification of the

organisation. CANopen is considered as a robust

fieldbus with highly flexible configuration options. It is used in many different
applications which are based on different application profiles. CANopen comprises
a concept to configure and communicate real-time data using synchronous and
asynchronous messages. Four message types (

) are distinguished.

1. Administration messages (layer management, network management and

2. Service Data Objects (

3. Process Data Objects (

4. Predefined Objects (emergency)

«
...
4
5
6
7
8
...
»

Summary of Contents for DTC510






























































Reviews:

No comments

Related manuals for DTC510

Brand: ICP DAS USA Pages: 7

I-2533CS Series

Brand: ICP DAS USA Pages: 8

Brand: Idemia Pages: 29

Brand: M-system Pages: 6

Brand: Contec Pages: 15

Brand: Polyaire Pages: 20

Brand: R. Beck Maschinenbau Pages: 40

Brand: Microlab Pages: 4

Brand: Sonoro Pages: 336

Brand: R. Beck Maschinenbau Pages: 31

Lumina LU20S-DNW

Brand: Leviton Pages: 3

Brand: Hannlomax Pages: 2

Termix VVX-I-R FI - 7 Series

Brand: Danfoss Pages: 32

Brand: Philips Pages: 45

Brand: Sharp Pages: 4

Brand: Sharp Pages: 32

Brand: Sharp Pages: 48

Brand: Sharp Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands