SmartPLC SafeLine with PROFIBUS slave interface
96
7.5.3
System: Setup
41670
The [Setup] menu item provides access to the configuration options of the system.
>
Set output access
42253
To set the control instance for the outputs of the AS-i slaves:
1 Select the menu page
►
>
►
Select [System settings] tab.
2 Set the control instance for the outputs of the AS-i slaves
►
Select the required value from the [Output access] list:
Parameter
Description
Possible values
[Output access]
Control instance for the
outputs of the AS-i slaves
[Gateway]
A higher-level PLC controls the outputs of the AS-i
slaves.
[Manual]
The operator controls the outputs of the AS-i slaves
via the graphical user interface.
[PLC]
The device-internal Standard-SPS controls the
outputs of the AS-i slaves.
3 Save the changes
►
Press [Accept selection] button to save the changes.
>
The selected instance controls the outputs of the AS-i slaves.
The outputs of the safe AS-i slaves are always controlled by the failsafe PLC of the
AC412S!