SmartPLC SafeLine with PROFIBUS slave interface
15
Local outputs
42291
The local I/O interface provides 4 output channels for the connection of devices (e.g. actuators,
relays). Each output channel can be used as safe or standard output. Configuration is effected via the
programming system CODESYS.
Notes on the connection of peripherals:
→
Connect devices to local I/O interface
(
Technical data:
→
Technical data
(
>
Possible combinations of input and output channels
42315
The inputs IN1...IN8 can be configured both as safe and non-safe inputs.
The outputs OUT1...OUT4 can be configured both as safe and non-safe outputs.
This permits the following minimum or maximum input and output combinations:
Min. configuration
Max. configuration
8 non-safe inputs
4 non-safe outputs
4 safe inputs, 2 channels (SIL3)
4 safe outputs, 1 channel (SIL3)
>
SD card slot
42194
The SD card slot (X5) is located behind the front flap of the device. The following actions can be
performed with an SD card:
Save and restore the device configuration
Storage medium for access to Standard-SPS
Technical data:
→
Technical data
(
>
PROFIBUS fieldbus interface
41428
The device communicates with the higher-level control instance of the PROFIBUS network via the
PROFIBUS interface (X6).
Notes regarding connetion concepts:
→
Configuration interface: connection concepts
(
Technical data:
→
Technical data
(