25
UK
8.2.1 Explanation main menu
SP1
Maximum limit value for the set process value
rP1
Minimum limit value for the set process value
ImPS
Pulse value
ImPR
Pulse reset
FEP
Frequency output of the end point of the flow value
FrEP
Frequency output of the end point of the frequency
OU1
Output function for OUT1 (volumetric flow or consumed quantity)
OU2
Output function for OUT2 (volumetric flow or temperature)
As an alternative: configure OUT2 (Pin2) as input for external reset signal:
Setting: [OU2] = [In�D]
Hno Hysteresis normally open
Hnc Hysteresis normally closed
Fno Window normally open
Fnc Window normally closed
ImP Pulse output
FRQ Frequency output
dOU Diagnostic output
I Current output
U Voltage output
In�D External input
ASP2
Analogue start value for the set process value
AEP2
Analogue end value for the set process value
SP2
Maximum limit value for the set process value
rP2
Minimum limit value for the set process value
D�In2
Configuration of the input (Pin2) for counter reset
EF
Extended functions / opening of menu level 2
