Note:
If you keep the Set pushbutton constantly pressed, the display
goes through all display areas; after the maximum value (1000 +
LED 10
3
) it jumps back to the minimum value 0.001. Briefly release the
pushbutton. You can then make new settings.
32
Press the
Set
push-
button once.
The flashing digit is increased. 9 is followed by 0 - 1 - 2
etc. The display area is not left.
Press the
Set
push-
button and keep it
pressed.
The flashing digit is increased, 9 is followed by 0 and
the more significant digit (left) becomes active.
If
digit 1
is increased this way, the display changes to
the next higher display area.
Do not press any
button for 3 s.
The next digit (right) flashes. If the 4th digit flashes for
3 s without being changed, digit 1 becomes active
again if it has a value > 0.
If
digit 1
has the value "0", the display changes to the
next lower display area.
Highlighted grey = flashing digit.
.
2 3
1
8
0 0 0 0 0
0
.
1 2
0
1
0 0 0 0 0
0
2 3
.
1
8
0
0
0 0 0 0
2 3
.
1
9
0
0
0 0 0 0
Example:
button “Set” pressed
Example:
.
2 3
1
9
0 0 0 0 0
0
button “Set” pressed once
.
2 3
1
9
0 0 0 0 0
0
.
2 3
1
9
0 0 0 0 0
0
.
2 3
1
9
0 0 0 0 0
0
.
2 3
1
9
0 0 0 0 0
0
no button pressed; after 3 s
after 3 s
after 3 s
after 3 s
.
2 3
1
8
0 0 0 0 0
0
3 0
.
2
1
0
0
0 0 0 0
3 0
.
2
1
0
0
0 0 0 0
Example:
.
2 3
1
9
0 0 0 0 0
0
button “Set” pressed once
.
2 3
1
0
0 0 0 0 0
0
.
2 3
1
0
0 0 0 0 0
0
.
2 3
1
0
0 0 0 0 0
0
.
2 3
1
0
0 0 0 0 0
0
button “Set” pressed once
no button pressed; after 3 s
after 3 s
after 3 s
after 3 s
after 3 s
(Change from area 2 to area 1).
(Change from area 1 to area 2).
