9
UK
Follow the instructions:
1� Mount the heat conductor
⑥
to the fixture with countersunk head screws
④
with maximum 3,0 Nm�
2� Hold one of the two device sides
②
on the heat conductor
⑥
�
> The fixture can cover the focus adjustment screw
⑧
� Mount the device with
the opposite device side to the heat conductor�
> The hook
⑦
of the heat conductor gets caught in the front of the device�
3� Tighten cylinder head bolts M5x75
①
with nuts
⑤
by hand�
> If the device has countersunk bore holes for the bolt heads, use the cylinder
head bolts M5x70�
4� Align the device in a straight line to the heat conductor
⑥
�
5� Tighten set screws
③
evenly�
> Tightening reduces the distance between the heat conductor and the device�
The heat conductor must lie flat on the device without air gap�
6� Tighten cylinder head bolts
①
with maximum 0,5 - 1,0 Nm�
7� Check that the device is aligned in a straight line and lies flat on the heat
conductor without gap�
> The surface temperature can only be reduced if the device lies flat on the heat
conductor without gap�
