Mobile 3D sensor
14
9.4 Changing the function of the smart sensor
The function of the O3M151 / O3M161 smart sensor can be changed by using
different firmware� O3M151 / O3M161 is supplied with the firmware with the basic
functions�
Only the function of the O3M151 / O3M161 smart sensor can be changed�
Each firmware is saved in a flash container (file extension fcr)� The flash
containers can be downloaded at:
www�ifm�com
→ Service → Download → Industrial imaging
To change the function of the smart sensor take the following steps:
1� Download the flash container�
2�
Connect ifm Vision Assistant with the device (→
9�2)�
3� Select the [Update] button (1)�
4� Select flash container�
> The selected flash container is transferred to the device� Transfer takes about
2 minutes� After successful transfer the device starts with the new functions�
Do not disconnect the device while the flash container is being transferred�
