UK
Mobile 3D sensor
11
9 Set-up
9.1 Put the sensor into operation
To put the sensor into operation follow the instructions below�
1� Switch off the power supply�
2� Use MCI cable to connect sensor and illumination unit�
3� Connect sensor with Ethernet cable�
4� Connect the sensor with the sensor cable for CAN bus and power supply�
> The sensor cable connects the power supply and CAN with the sensor�
5� Connect illumination unit with power supply�
6� Connect CANfox USB interface with PC via USB and with CAN via adapter cable�
7� Establish power supply�
During the first set-up the sensor connects with the illumination unit�
Connection may take up to 60 s�
9.2 Connect ifm Vision Assistant
To connect ifm Vision Assistant take the following steps:
1� Start ifm Vision Assistant software on the PC�
2� Select the [Find sensor] button (1)�
