25
UK
10 Parameter setting
During parameter setting the unit remains in the operating mode internally� It
continues its monitoring function with the existing parameters until the parameter
setting has been completed�
10.1 General parameter setting
3 steps must be taken for each parameter setting:
1
Select the parameter
► Press [Mode/Enter] until the re-
quested parameter is displayed
.
2
Set the parameter value
► Press [Set] and keep it pressed�
> Current setting value of the param-
eter flashes for 5 s�
> After 5 s: setting value is changed:
incrementally by pressing the button
once or continuously by keeping the
button pressed�
Numerical values are incremented continuously� For reducing the value: let the dis-
play move to the maximum setting value� Then the cycle starts again at the minimum
setting value�
3
Acknowledgement of the parameter
value
► Press [Mode/Enter] briefly�
> The parameter is displayed again�
The new setting value is stored�
Setting of other parameters:
► Start again with step 1�
Finishing the parameter setting:
► Press [Mode/Enter] several times until the current measured value is displayed or wait
for 15 s�
> The unit returns to the operating mode�
If [S.Loc] is displayed → 11.1 Operating indicators.
