manualshive.com logo in svg

IFM Electronic DTE800, Operating Instructions Manual

Share
Download
IFM Electronic DTE800 Operating Instructions Manual Download Page 21

21

UK

The Windows menu "Internet protocol (TCP/IP) Properties" is accessible for example via: Start → Control 

Panel → Network Connections → Local Area Connection → Properties�
Select the menu item "Use the following IP address"�
Verify and set the IP address, if necessary (here e�g� 192�168�0�2)�
Enter the subnet mask (255�255�255�0)�
Leave "Default gateway" blank�
Confirm the settings by [OK]�

To integrate the reader into a corporate network, please contact your administrator who will be able to 

allocate you a spare IP address and assign the correct network mask� Alternatively the reader can also 

be configured to obtain an IP address automatically� For this service, referred to as DHCP, an appropriate 

DHCP server must be operating in the network� You can obtain more details about this from your network 

administrator�
The IP addresses of the control computer and the reader must be in the same IP range, but they must not 

be the same� The network mask on the other hand must be identical�
In order to establish the connection to the reader, the program offers two options� On the one hand, it is 

possible to communicate directly with the reader by entering the IP address, on the other hand it is also 

possible to establish a connection using the reader's host name�
For the connection using a host name, there must be a correspondingly configured DHCP server and a 

DNS in the network� After power up, the reader makes a DHCP request and logs on to the DHCP server� 

This assigns the reader an IP address and reports the network name and IP address to the DNS server� 

If now the connection has been established, the IP address of the reader is determined by an enquiry on 

the DNS server�
The establishment of the connection is achieved if the establishment of the connection is selected under 

the Ethernet header, meaning the selection of the IP address or name� For this, the correct IP address 

or the host name of the reader must be entered in the corresponding field� Pressing the [Connect] button 

then opens the data channel to the reader�
If you wish to establish a connection via an IP address, the "IP address" field must be highlighted and this 

address entered in it� The connection is established by clicking on the [Connect] button�

Summary of Contents for DTE800






































Reviews:

No comments

Brands by name

Popular brands

Load more brands