O Slave setup
(Details about the connected AS-i slaves)
∇
Digital or analogue inputs/outputs of the connec-
ted AS-i slaves
∇
Current and projected parameters of the connec-
ted AS-i slaves
∇
Current and projected I/O and ID codes of the
connected AS-i slaves
∇
Message faults in the communication to the
connected AS-i slaves
O Fieldbus setup
∇
Input of the CANopen Node Address of controller
∇
Input of the baud rate of the controller
∇
Input of the module length
PAGE
15
Modul 1 =digital inputs master1A
Modul 2 = digital outputs master1A
Modul 3 =digital inputs master2A
Modul 4 = digital outputs master2A
Modul 5 =digital inputs master1B
Modul 6 = digital outputs master1B
Modul 7 =digital inputs master2B
Modul 8 =digital outputs master2B
Modul 9 =analogue multiplexed input
Modul 10 = analog. multiplexed output
Modul 11 = command channel
Modul 12 = PLC inputs
Modul 13 = PLC outputs
Modul 14 = analogue input master 1
Modul 15 = analogue output master 1
Modul 16 = analogue input master 2
Modul 17 = analogue output master 2
Modul 18 = diagnosis
