12
Slave info
(Details about the connected AS-i slaves)
Indication of the digital or analogue inputs/outputs of the
connected AS-i slaves
Indication of the parameters of the connected AS-i slaves
Indication of the ID and I/O codes of the connected AS-i
slaves
Indication of the transmission errors to the connected
AS-i slaves
Slave setup (Settings of the connected AS-i slaves)
Digital or analogue inputs / outputs of the connected AS-i
slaves
Current and projected parameters of the connected AS-i
slaves
Current and projected I/O and ID codes of the connected
AS-i slaves
Message errors in the communication to the connected
AS-i slaves
System setup (Device settings of the controller
e
)
Store the current system settings
Setting of the baud rate of the serial programming
interface
Setting of the parameters of the Ethernet programming
interface (option)
Enter the new password to disable or enable the menu
functions
Update the controller
e
operating system (special software
required!)
Reset to the factory settings of the controller
e
IP address of the Ethernet programming interface
(optional)
