5
To fully disconnect the device from the mains, unplug the AC/DC cable from power outlet.
Power adapters may become warm during normal use, and prolonged contact may cause
injury.
Always allow adequate ventilation around power adapters when using them.
The ventilation should not be impeded by covering ventilation openings with items to avoid
overheating and malfunction. Maintain a clearance of at least 10 cm around the device.
The device should be used in a moderate climate.
Do not plug or unplug USB port with wet hands, or it may result in risk of electric shock.
The device is built with an internal rechargeable battery: do not expose the phone to
excessive heat such as sunshine, fire or the like.
Battery contains materials which are hazardous and harmful to the environment. The battery
must be recycled or disposed of separately from household waste.
Adapter shall be installed near the equipment and shall be easily accessible.
Specific Absorption Rate (SAR)
During SAR testing, this device was set to transmit at its highest certified power level in all
tested frequency bands, and placed in positions that simulate RF exposure in usage, and near the
body with the separation of 0.4 inches (10 mm). Although the SAR is determined at the highest
certified power level, the actual SAR level of the device while operating can be well below the
maximum value.
These requirements set a SAR limit of
1.6 W/kg averaged over ten gram of tissue for head or
body, and set a SAR limit of
4.0
W/kg averaged over ten gram of tissue for limbs. This product
was tested and recorded, and the maximum reported SAR was
0.83
W/kg for body,
0.76
W/kg for
limb.
The actual SAR level will be much lower than the above value since the product has been
designed to use the minimum energy for necessary communication with the base station.
SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters
or similar accessories that have no metallic component in the assembly and must provide at least
1.0 cm separation between the device and the user's body. Accessories designated by Manufacture
or available on Market must be used for Body-worn operation compliance.
FCC Compliance
This phone complies with section 15 of FCC Regulations. Changes or modifications not
expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
