2
Thank you for purchasing the iFly 740
▪
The iFly 740 Owner’s Manual is for your convenience and safety when using this product.
▪
Before operating the iFly 740, and to take full advantage of this aviation navigation system, please read the manual carefully and
follow its instructions.
▪
Depending on the navigation system model type, the contents of this owner’s manual may vary. The navigation system and the
owner’s manual are subject to changes in function or performance without prior notice for the convenience of users.
▪
iFly GPS will not be responsible for any equipment damage resulting from improper installation or use.
Safety precautions
For your safety, and your passengers, please follow these safety warnings.
▪
Make sure that the device is installed securely to prevent the device from coming off or moving during operation.
▪
The GPS receiver might not function normally in some aircraft that have heated windows or when recessed fitted into the panel.
In these cases, please contact our sales representative to buy an external GPS antenna, which is sold as an optional item
▪
GPS signals might be affected under hangers, in built-up areas or in know dead spots due to weak electrical waves.
▪
Use the navigation device only for situational awareness. Chart data must be updated regularly to maximize safety.
▪
Store device out of direct sunlight to prevent it from damage due to overheating.
▪
Make sure that water or other liquids do not get inside the product. This could cause fire or electric shock.
▪
To reduce the risk or electric shocks, do not open the cover (or back). There are no user-serviceable parts inside.
▪
The GPS receiver operates optimally at 14 to 140 degrees. If the temperature is too low or too high, the product might not
function correctly. Make sure that the optimal temperature is maintained.
▪
If the suction mount is attached to the glass for a long time, it might come off due to reduced adhesiveness.
▪
The memory card (SDHC) could be damaged if used with any other devices.
▪
Do not remove the memory card (SDHC) while the product is in operation. It may cause mechanical problems.
▪
Do not touch the product with wet hands. It might cause electric shock or damage.
▪
Do not disassemble or drop the product. It might cause damage or a mechanical breakdown.
▪
Use only the specified power adaptor. Using a different type of adaptor might cause damage or a mechanical breakdown.
▪
Touch the LCD with fingers or blunt devices only. If a sharp drill or a nail is used, it might cause damage.
▪
Use only soft and dry cotton cloth when cleaning the product. Do not use strong solvents such as alcohol, benzene, or thinners, as
these might damage the surface of the product.
