
Tools required
(Tools not supplied)
Parts Supplied
Specifications
The taps is suitable for use at water supply pressures of 0.3 bar (min.) to 5 bar (max.).
This taps should be installed in compliance with Water Regulations. For further
details contact your Local Water Authority.
(a) Identify all components and check pack contents.
(b) Turn off water mains supply.
Installation
1. Fit Tap Body (1) to bath, ensuring that the Sealing Washer (3) is fitted between
the Flange (2) and the bath. if the Flange (2) is not supplied, fit Sealing Washer (3)
directly to the Tap Body (1).
2. Fit Anti-Rotational Washer (4) over inlet legs. Then fit Backnuts (5) to the inlet
legs and tighten.
DO NOT OVER TIGHTEN.
3. Connect to the water supply using suitable plumbing joints.
NO.
Description
Qty
1
Tap Body
1
2
Flange (if supplied)
2
3
Sealing Washer
2
4
Anti-Rotational Washer
2
5
Backnuts
2
3