8
6. Attach the Seat (116) to the Bench Frame (107)
with two M6 x 65mm Screws (120) and two M6
Washers (61).
116
61
107
120
6
106
106
109
7
110
125
59
7. Grease the barrel of an M10 x 107mm Bolt Set
(106). Attach the Leg Lever (110) to the Front Leg
(109) with the Bolt Set.
Make sure that the bar-
rel of the Bolt Set is inserted through both
sides of the bracket on the Leg Lever.
Then, slide the Weight Spacer (125) onto the post
on the Leg Lever (110). Next, tighten the Weight
Tube (59) onto the post.
8. Insert the Long Pad Tube (130) into the Front Leg
(109). Slide two Foam Pads (128) onto the Long
Pad Tube. Then, press a 19mm Round Cap (134)
into each Foam Pad.
128
128
134
134
8
130
109
All manuals and user guides at all-guides.com
