11
10
11
11. Fully insert a Weight Rest (15) into an Upright (1).
Repeat this step with the other Weight Rest
(15). Make sure that the Weight Rests are at
the same height.
10. Orient the Seat (9) as shown.
Attach the Seat (9) to the Frame (3) with four
M6 x 16mm Screws (24); start all the Screws,
and then tighten them. To avoid damaging
the Seat, tighten the Screws only until the
Seat does not move or feel loose.
3
24
24
12. Make sure that all parts are properly tightened before you use the weight bench. The use of all
remaining parts will be explained in ADJUSTMENT, beginning on page 12.
15
15
1
1
9