11
7
7. Set the handrail assembly (E) on the floor in the
position shown. Attach the Push Bar Top (110)
to the Push Bar Bottom (109) with six #8 x 5/8"
Machine Screws (106); start all six Machine
Screws, and then tighten them. Do not over-
tighten the Machine Screws.
106
106
106
E
110
109
92
8. With the help of a second person, hold the
handrail assembly (E) below the Console (93)
as shown. Then, move both sides of the hand-
rail assembly upward at the same time, sliding
the inner corner (F) of the handrail assem-
bly between the Console and the Console
Base (92).
Next, attach the handrail assembly (E) with
four 3/8" x 5 1/2" Screws (1) and four 3/8" Star
Washers (3) (only one side is shown); start all
four Screws, and then tighten them.
Then, tighten the four 5/16" x 3/4" Patch Screws
(108) (only one side is shown).
E
3
1
3
8
F
108
93