Thank you for purchasing the innovative iFIT
®
SMARTBEAT heart rate monitor. Please read this
manual before using the heart rate monitor.
IMPORTANT: To download a manual in a different
language, please see the accompanying Quick
Start Guide.
If you have questions after reading this manual,
please see the accompanying Quick Start Guide
for Member Care contact information.
HOW TO CHARGE THE HEART RATE MONITOR
You must charge the heart rate monitor before
it can be used. To charge the heart monitor, first
remove the small sheet of clear film (not shown)
from the back of the sensor (A).
Next, align the metal pins (B) on the charger (C) with
the contacts (D) on the back of the sensor. Then, set
the charger on the sensor; a magnet in the charger
will hold the charger in place.
Plug the cord (E) on the charger into a USB port on
your computer or on another power source. While
the heart rate monitor is charging, the LED light
on the front of the sensor will flash red. When the
sensor is fully charged, the LED light will turn solid
green.
B
C
D
A
E
Model Number IFAHR120
IFIT is a registered trademark of iFIT Inc. The Bluetooth
®
word mark
and logos are registered trademarks of Bluetooth SIG, Inc. and are used under license.
ANT+™ is a trademark of Garmin Ltd. or its subsidiaries.