17
If you purchase the optional chest heart rate monitor (see page 28), follow the additional step below to
install the receiver included with the heart rate monitor.
20. Note: If you have already assembled the ellipti-
cal, reverse steps 15 and 14.
See the inset drawing.
Remove the paper from
the adhesive pad on the back of the receiver (A).
Orient the receiver so that the antenna on
the receiver is in a horizontal position parallel
to the floor.
Press the receiver onto the indi-
cated location on the inside of the Rear Upright
Cover (81).
Next, connect the wire on the receiver (A) to the
Receiver Extension Wire (111) in the Upright (4).
Note: Discard any other wires that are included
with the heart rate monitor.
Note: If you have already assembled the exer-
cise bike, complete steps 14 and 15.
20
81
4
A
81
111
Antenna
A
Summary of Contents for FREEMOTION 515
Page 4: ...4 ...
