3
METHOD 2—IP ADDRESS
IMPORTANT: You will need to know your network SSID (network
name), network encryption type, and network password.
Note: You can use a variety of Internet browsers to configure the iFit
module. For best results, use the Google Chrome™ browser.
1. Insert the iFit Module into the console.
Insert the iFit Module
into the iFit port on your
fitness equipment con-
sole. An LED indicator
light on the iFit Module
will glow amber.
To learn how to read the
indicator light on the iFit
Module, see the back
cover of this manual.
IMPORTANT: If your
fitness equipment
console has a tablet holder, you may have to remove the tab-
let holder to access the iFit port. To remove the tablet holder,
see your fitness equipment user’s manual. After you insert
and configure the iFit module, reattach the tablet holder.
2. Select the network IFIT_SETUP.
On your computer,
smartphone, tablet,
or other Wi-Fi device,
open the list of available
networks to which your
device can connect.
One of the options will
be IFIT_SETUP; select
this network.
If this network does not appear, make sure that your Wi-Fi device
is within range of the console, and then close and re-open your
list of networks.
Note: It may take a few minutes for the network IFIT_SETUP
to appear. The network IFIT_SETUP will not appear if the iFit
Module has already been configured to connect to a wireless
network. Go to step 6 and reset the iFit Module.
3. Go to the setup web page.
Open a web browser on your computer, smartphone, tablet, or
other Wi-Fi device. Next,
type the following IP address into the
URL bar in your browser: http://192.168.0.1:8080
Your browser will load a web page. If the web page does not
appear, double-check the IP address and the previous instruc-
tions of this step.
4. Connect the iFit Module to your wireless network.
Follow the instructions on the web page to connect the iFit
Module to your wireless network.
5. Wait for the setup process to finish.
If the setup process is successful,
the indicator light on the iFit
Module will glow green.
The iFit Module is now connected to your
wireless network and you are logged in to your iFit account. Go
to step 7.
If the setup process has failed,
the indicator light will glow red.
Go to step 6 and reset the iFit Module.
6. Reset the iFit Module if necessary.
To reset the iFit Module and start the configuration process over,
press and hold the Reset button on the iFit Module for a few
seconds;
do not remove the iFit Module from the iFit port on
the console.
The indicator light will glow amber when the iFit Module is ready
again for setup. Then, repeat steps 1 to 5.
7. The iFit Module is now configured.
To learn how to read the indicator light on the iFit Module, see
the back cover of this manual.
To use the iFit Module, see your fitness equipment user’s manual
or go to
support.iFit.com.
If you have questions after following these instructions, go to
support.iFit.com for assistance.
iFit
Module
