Page
8
SECTION 4.0
GENERAL INFORMATION
4.1 SCOPE OF THIS MANUAL
This manual is intended to inform a qualified transmitter operator or technician of the normal
operating and maintenance procedures for the SMX100. It is not intended to be a course of
instruction for unqualified personnel.
4.2 GENERAL SPECIFICATIONS
The specifications listed below represent the minimum performance characteristics at the time of
delivery.
SPECIFICATIONS
Frequency Response:
Band One:
10 kHz - 220 MHz
Band Two:
200 MHz - 1000 MHz
Power Output:
Minimum 100 Watts
AC Source:
115 VAC, 50/60 Hz, Single Phase
Power
Gain:
50
dB
Input Impedance:
Nominal 50 Ohms unbalanced
Output Impedance:
Nominal 50 Ohms unbalanced
Input Signal Levels:
< 0 dBm ( 1.0 mW ) See data sheet for specific input drive levels
Harmonic Distortion:
-20dBc @ 60W
Duty
Cycle:
CW
Spurious:
-50dBc
