Clock
24. Clock Synch mode: Atomic/DARS/10MHz/Standalone
If the Clock Synch mode is used, please select the correct clock device.
Atomic Clock:
Connect to an external atomic clock source.
DARS:
Digital Audio Reference Signal, connect to an external DARS clock reference (it is a
S/PDIF signal without any actual audio data).
10MHz:
Connect a 10MHz external clock to the BNC Sync In to synchronise with the rest
of the system. BNC Sync Out will output a 10MHz clock even if no external 10MHz
clock is connected.
Standalone:
No external clock source is used.
25. Output
BNC multifunction Sync Out (DARS out, 10MHz out), selection via Clock Sync mode switch.
26. DC Loop-Out
DC loop through for use with other Pro series products (e.g. Pro iCAN).
27. Power supply connection
15V/4A DC power input.
Tip: Any 9v to 18v DC power source with a minimum of 60VA rating can be used with the Pro iDSD (including vehicular, RV and boat based
12V DC power). We strongly recommend the use of the included iPower Plus 15v. It offers the latest in power supply technology and is
better and cleaner than any battery or aftermarket linear power supply.
12
