Automatic Detergent Dispenser Tray
Designed for automatic dispensing of detergent. The
Detergent Dispenser Tray should be filled with
recommended detergent quantity before the start of a
programme.
The detergent tray must be pulled out, filled as required and
shut before athe machine is switched on.
On - Off Switch / Programme Selector Knob
To switch ON the machine and to select the right
programme as per the fabric being washed and extent of
soilage.
q
A choice of 10 programmes is
available to wash different kinds /
loads of clothes.
q
Programme selection should be
done before the machine is
switched ON.
q
THE STARTING POINT OF PROGRAMME NEEDS TO BE
SELECTED BY SHIFTING THE PROGRAMME SELECTOR
KNOB ADJACENT TO PRINTED LETTERS. OPERATING
THE MACHINE BEYOND PRINTING ZONE MAY RESULT IN
HIGHER CONSUMPTION OFWATER & ELECTRICITY AND
WILL NOT IMPROVE WASH QUALITY.
q
Machine should be switched on by gently pulling out the
programme selector knob.
q
After initiating the programme, machine runs through
automatically. If for any reason you wish to change the
programme switch OFF the machine by pushing in the
programme selector knob, then set the desired
programme and re-start.
q
KNOB SHOULD BE TURNED ONLY IN CLOCKWISE
DIRECTION.
13
Frost Protection
If the machine is being operated in very cold temperature, all
the water should be drained out after use.
q
Remove Fluff Filter.
q
Locate the drain hose and drain the water.
q
Disconnect inlet hose from the tap and drain.
Draining During Emergencies
Incase of a long power faliure during a programme run, the
water can be drained from the drum through the drain hose
q
Locate the drain hose and pull out the drain hose to drain
water in a large shallow container.
q
Before restarting machine, ensure that drain plug is fixed on
drainhose properly and fluff filter water line is filled with water
by running the machine without any clothes or detergents.
q
Spillage of water can rust the base plate. Draining through
drain hose prevents rusting.
24
