background image

WAY OF USE

Delay time program

Delay time means the beginning time of washing.

1. Switch on  "Power" button.

2. Open the tap and hang the drain hose up.

3. Load laundry and put  detergent.

4. Select the proper water level according to the 

     quantity of clothes.

5. Select the functions and programs.

6. Press "Delay button to select the beginning time of 

     washing.

7. Press "Start/Pause" button and close the lid.

Delay

Method of use of "Delay" button

In each press of the button, the preset 
time changes  by one hour within 24h. 
After 24 hours, each press on the 
button add 6 hours until 48h.

Remaining  time

(Minutes)

Delay  (hour)

Confirmation of the delay and inspection

After the delay function is started, the corresponding light will be turned on, and other lights 

are turned off.

        After the delay function is started, press "Delay" button continuously, you may see the selected 

programs and the rest of the delay time. Loosen the button, the program will automatically 

come back to delay status.

Cancel the delay time, or alter the delay time

Before the program is started , the delay indicator lights, the delay time is selected from 1 to 

48 hours,afer the delay time is set over 48 hours, the delay indicator is turned off , the    

function will be cancelled.

         Press power switch to end program, and to cancel delay time at the same time.

         To change the delay time, please press "Start/Pause", and then press "Delay" button to reset.

13

Checking pocket of clothes to avoid coins, clips and etc..
Reversing the clothes which is easy teaseled.
To resist clothes`s crossing, please cross their sleeves or the ties in advance.
Before washing , remove from clothes`s bedload.
Zipping the clothes if they have in advance.
Separating clothes if they have easily fading color.
To put clothes of puff and into washing net bag.
For special dirty part of  clothes you may use some detergent.

Washing tips

Pre-wash of the dirty clothes

As for seriously stained dirty clothes with mud, one of the "R

inse-spin" program can be selected to 

perform pre-washing, and then add washing powder and select the fully automatic  program to 

wash them. You can use the hot water for wash.

14

1. Dissolve the detergent  with proper amount of warm water (below 50

), then pour it into 

the washing  machine.
2. Fold up the blanket as the method showed in the figures below and put it into the washing 

tub.

3. Switch on the power and press the "Program" button to select the "Bulky" program and 

"High" or "Medium" water level.

4. Press the "Start/Pause"  button, and c lose the lid.
5. At the end of program,put the blanket on a clothes line. Make sure the blanket is flat and 

free of wrinkle.

Notices:

Fold in two by the long side Fold three times in the

same direction 

Roll up the blanket.   Put it into the wash tub with

the edge downwards

1. Put some laundry and detergent in the washing  tub,  press "Function

2. Take out the laundry after hearing the buzzing sound.
3. Put the second batch of laundry in the washing tub and let the  washing machine  finish 

the whole washing program.

4. Take out  the second batch of laundry after hearing the buzzing sound.
5. Put  the first batch laundry in the washing tub. Power on and chose wash-spin functions. 

Let the washing machine finish the whole  program.

" button and set the 

"Single wash"  program then make the washing machine into operation..

Use the detergent  twice

WAY OF USE

Wash of blanke

t

The weight of blanket should be less than 4kg, and please select the 

bulky 

program  for  

washing.

Load size and detergent 

Notices:

The highest priority of using the detergent is low and mid foam detergent.

The volume of detergent is changed with different type. You need to read the user manual

Water volume is different  because of clothes variety. When the washing machine runs not 

well, please adjust clothes volume and water level.

The water volume above listed is based on normal clothes volume.

8

7

About 53L

About 70g

6

5

4

3

2

1

<0.8kg  

Water
volume

Weight of 
 washing

Water

level

Washing powder

About 48L

About 43L

About 38L

About 34L

About 30L

About 25L

About 17L

About 66g

About 60g

About 52g

About 44g

About 36g

About 28g

About 20g

Summary of Contents for AW60-90210















Reviews: