Back Grille
Guard
Mounting Nut
Loosen
Don’t take
out the ring
ring
Guard Mounting Nut
Fan Blade
Blade Cap
Loosen
HOW TO CLEAN
1.
2.
Switch the appliance OFF. Unplug the power cable from the wall socket.
Wait for the appliance to cool down completely.
To disassemble
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
Tilt the Front Grille until it faces upwards. Unscrew, using a Phillips screwdriver, the single
screw at the bottom of the Front Grille that holds the Front and Back Grilles together. Keep
track of where you have placed the screw as you will need it later in step 6. DO NOT lose the
screw.
Position the Fan until the marks on the Front and Back Grilles are directly in front of you.
Grip the Front Grille with one hand while holding on to the Back Grille with the other. Slide
the Front Grille anti-clockwise towards yourself.
Detach the Front Grille from the Back Grille.
Tilt the Back Grille until it faces forwards.
Loosen the Blade Cap by turning clockwise and remove.
Slide the Fan Blade out.
Remove the Guard Mounting Nut by turning
anti-clockwise and remove.
Slide out the Back Grille.
DO NOT attempt to remove the ring on the
Motor Shaft.
Front Grille
Slide the Front Grille
Back Grille
Front Grille
Detach the Front Grille
from the Back Grille
Back Grille
5