User Manual
DUM4021418-EN
2
www.ies-synergy.com
By
The manuals are updated regularly. Visit
www.sav-ies-synergy.zendesk.com
to ensure that you have the
latest version. The version type and update dates are listed on the front cover of this manual.
The information provided in this documentation contains general descriptions and/or technical characteristics of the per-
formance of the products contained herein. This documentation is not intended as a substitute for and is not to be used
for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or
integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the
relevant specific application or use thereof. Neither IES Synergy nor any of its affiliates or subsidiaries shall be responsible
or liable for misuse of the information contained herein. If you have any suggestions for improvements or amendments or
have found errors in this publication, please notify us.
You agree not to reproduce, other than for your own personal, noncommercial use, all or part of this document on any
medium whatsoever without permission of IES Synergy, given in writing. You also agree not to establish any hypertext links
to this document or its content. IES Synergy does not grant any right or license for the personal and noncommercial use of
the document or its content, except for a non-exclusive license to consult it on an “as is” basis, at your own risk. All other
rights are reserved.
All pertinent state, regional, and local safety regulations must be observed when installing and using this product. For rea-
sons of safety and to help ensure compliance with documented system data, only the manufacturer should perform repairs
to components.
When devices are used for applications with technical safety requirements, the relevant instructions must be followed.
Failure to use IES Synergy software or approved software with our hardware products may result in injury, harm, or improper
operating results.
Failure to observe this information can result in injury or equipment damage.
© 2023 IES Synergy. All rights reserved.