6
Hinged pliers of the K3 series and K2 series are dielectric and designed
for use with voltages up to 1 000 V.
Electric shock protection class: II.
Technical data
Adjustable pliers of K3 series of IEK trademark (hereinafter
—
the pliers) are
designed for gripping flat, round and multi-sided parts.
The contents of the tool kits are shown in table 4.
The delivery set of the products is shown in table 3.
Round nose pliers of K3 series of IEK trademark (hereinafter
—
the round
nose pliers) are designed for gripping wire, metal wire, rod, and performing a
uniform bend. The main purpose of round nose pliers is to bend wire and narrow
thin plates.
Hinged pliers of K3 series and K2 series meet the requirements
of IEC 60900.
The main parameters of the tool according to the dimensions are given
in tables 1 and 2.
Completeness of set
Safety precautions
IT IS FORBIDDEN
TO USE DIELECTRIC TOOLS IN ELECTRICAL INSTALLATIONS
WITH VOLTAGES OVER 1 000 V.
ATTENTION
Before starting work, carefully read the operating manual
and safety instructions for dielectric tools.
IT IS FORBIDDEN
ATTENTION
Disregard for the safety regulations for electrical installation works
may cause severe electrical injuries and failure of the tool.
TO WORK WITH TOOLS WITH DAMAGED INSULATION!
