IEI Technology WSB-G41A User Manual Download

Page: 92 / 146

WSB-G41A CPU Card

Page 80

Legacy USB Support [Enabled]

Use the

Legacy USB Support

BIOS option to enable USB mouse and USB keyboard

support.

Normally if this option is not enabled, any attached USB mouse or USB keyboard does not

become available until a USB compatible operating system is fully booted with all USB

drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard

can control the system even when there is no USB driver loaded onto the system.

Disabled

Legacy USB support disabled

Enabled D

EFAULT

Legacy USB support enabled

Auto

Legacy USB support disabled if no USB devices are

connected

USB2.0 Controller Mode [HiSpeed]

Use the

USB2.0 Controller Mode

option to set the speed of the USB2.0 controller.

FullSpeed

The controller is capable of operating at 12 Mb/s

HiSpeed D

EFAULT

The controller is capable of operating at 480 Mb/s

5.4 PCI/PnP

Use the

PCI/PnP

menu (

BIOS Menu 14

) to configure advanced PCI and PnP settings.

WARNING!

Setting wrong values for the BIOS selections in the PCIPnP BIOS

menu may cause the system to malfunction.

Summary of Contents for WSB-G41A



















































































































































Search results

Summary of Contents for WSB-G41A

Reviews:

Related manuals for WSB-G41A

Brands by name

Popular brands

IEI Technology WSB-G41A, User Manual

Search results

Summary of Contents for WSB-G41A

Reviews:

Related manuals for WSB-G41A

Brands by name

Popular brands