IEI Technology WSB-9454 User Manual Download Page 34

Page: 34 / 234

WSB-9454 CPU Card

Page 18

1.2V CMOS process providing a low-power system solution. The GbE controllers come

with the following features:

Integrated 10/100/1000 transceiver

10/100/1000 full/half-duplex MAC

Automatic MDI crossover function

Supports PCIe v1.0a

Wake-on-LAN support meeting the ACPI requirements

Statistics for SNMP MIB II, Ethernet-like MIB and Ethernet MIB (802.3z,

clause 30)

Serial EEPROM or serial flash supported

JTAG supported

196-FBGA package

2.9 Drive Interfaces

The WSB-9454-R10 model supports the following drive interfaces:

2 x SATA II drives

1 x IDE channel supports two Ultra ATA 100/66/33 devices

1 x FDD

The WSB-9454DVI-R10 model supports the following drive interfaces:

4 x SATA II drives

1 x IDE channel supports two Ultra ATA 100/66/33 devices

1 x FDD

Summary of Contents for WSB-9454











































































































































































































































Search results

Summary of Contents for WSB-9454

Reviews:

IEI Technology WSB-9454, User Manual, Page: 34 / 234

Search results

Summary of Contents for WSB-9454

Reviews: