IEI Technology WSB-9454 User Manual Download

Page: 164 / 234

WSB-9454 CPU Card

Page 148

Fixed Mode

A fixed portion of graphics memory is reserved as

graphics memory.

DVMT Mode

EFAULT

Graphics memory is dynamically allocated

according to the system and graphics needs.

Combo Mode

A fixed portion of graphics memory is reserved as

graphics memory. If more memory is needed,

graphics memory is dynamically allocated

according to the system and graphics needs.

DVMT/FIXED Memory [128MB]

Use the

DVMT/FIXED Memory

option to specify the maximum amount of memory that

can be allocated as graphics memory. This option can only be configured for if

DVMT

Mode

Fixed Mode

is selected in the

DVMT Mode Selec

t option. If

Combo Mode

selected, the maximum amount of graphics memory is 128MB. Configuration options are

listed below.

64MB

128MB

EFAULT

Maximum DVMT

Summary of Contents for WSB-9454











































































































































































































































Search results

Summary of Contents for WSB-9454

Reviews:

Related manuals for WSB-9454

Brands by name

Popular brands

IEI Technology WSB-9454, User Manual

Search results

Summary of Contents for WSB-9454

Reviews:

Related manuals for WSB-9454

Brands by name

Popular brands