WMS-2208R WEB MAIL SERVER SERVICE MANUAL
Chapter 9
FACTORY DEFAULT SETUP
Overview
Create Disk Volume
Overview
When a system is equipped with the hard drives and about to be shipped out, be
sure to perform below checks:
Create Disk Volume
Pre-configure the hard drive on the system to a single volume if there is only
one hard drive mounted. Pre-configure the hard drives on the system to a
RAID-0 volume if there is two hard drives mounted.
Before performing the factory default setup, start the browser and open the
system administration web page of the web mail server.
Create Disk Volume
Follow below steps to configure the default disk volume:
1.
In system settings web page, go to “Disk Configuration”. Select “RAID 0
Striping Disk Volume” for the system with two hard drives.
For single hard drive:
IEI CONFIDENTIAL
23
