manualshive.com logo in svg

IEI Technology WAFER-LX-800-R12, User Manual

Share
Download
IEI Technology WAFER-LX-800-R12 User Manual Download Page 84

 

 

WAFER-LX Motherboard 

Page 66 

 WARNING! 

Please note that the installation instructions described in this manual 

should be carefully followed in order to avoid damage to the 

motherboard components and injury to the user. 

 

 WARNING! 

When installing electronic components onto the motherboard always 

take the anti-static precautions listed above in order to prevent ESD 

damage to the motherboard and other electronic components like the 

CPU and DIMM modules 

The following components must be installed onto the motherboard or connected to the 

motherboard during the installation process. 

 NOTE: 

Some WAFER-LX models already have preinstalled CPUs. If the 

motherboard has a preinstalled CPU then the following section on CPU 

installation can be skipped. 

ƒ

 DIMM 

modules 

ƒ

 

Peripheral device connection 

5.4.1 DIMM Module Installation 

5.4.1.1 Purchasing the Memory Module 

When purchasing SO-DIMM modules, the following considerations should be taken into 

account: 

ƒ

 

The SO-DIMM socket can support a memory chip with a maximum size of 

1 GB 

Summary of Contents for WAFER-LX-800-R12




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands