26
1.3 Advanced CMOS Setup
The following screen will be displayed if you select Advanced CMOS Setup:
You can change the value of each option by using <PgUp> and <PgDn> key. The
available values are shown on the right screen.
Quick Boot
Enabled: To enable the BIOS to boot quickly when you turn on your computer. The
BIOS will only check the first 1MB of the system memory.
Quick Boot
Disabled: BIOS will test all system memory when it boots up. It will spend about
40 seconds until it receives a Ready signal from the HDD. It will also wait for you
to press the <Del> key or not.
1
st
, 2
nd
, 3
rd
Boot Device
To define the device type for booting after the routines check up completes. If the
1
st
Boot Device fails, BIOS will attempt to boot from the 2
nd
or the 3
rd
device.
Try Other Boot Devices
BIOS will try to boot from any other available device in the system if the 1
st
, 2
nd
and
3
rd
device fails to boot.
Floppy Access Control
To define the read/write access which is set when booting from a floppy drive.
