27
Maintenance
VioGate has been specially designed to run on 24 hours, 7 days a week and to be
ready at all times. It is also robust to protect against system crashes caused by power
loss. This section provides a general maintenance overview.
Shutdown/Restart the Server
To shutdown/restart the server, please open the administration web page and go to
System Tools – Restart. Follow the instructions to restart or shutdown the system.
Reset the Administrator Password & Network Settings
If you accidentally forget the administrator password, you will not be able to perform
any administration work on VioGate. Under this condition, you can reset the
administrator password and network configuration to the factory default.
1.
Use the tip of a ball point pen and depress the configuration reset switch located
on the front of VioGate. Hold it for about 5 seconds until the beep.
2.
The network configuration will be reset, and you may need to re-configure some
or all of the network settings.
3.
Use a web browser to connect to VioGate. Enter the System Administration and
enter the following login name and password.
Login: Administrator
Password: admin
You can then perform system administration.
Note
: If the configuration reset switch is disabled in the
System Tools · Hardware
page, you are no longer able to use this function. Please remember your
administrator password.
Update the System
Enter the System Administration page by a web browser, and have the system updated
in the System Tools – System Update page. Before updating the system, please
make sure that the image file that you are about to update is the correct version and
read through the instruction carefully.
Restore the Configurations
To restore the configurations to the factory default, please use a web browser to
