IEI Technology tKINO-BW Series, User Manual, Page: 104 / 143

tKINO-BW SBC
Page 90
5.3.8.1.6 Serial Port 6 Configuration

Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled
Disable the serial port

Enabled D
EFAULT
Enable the serial port

Change Settings [Auto]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D
EFAULT
The serial port IO port address and interrupt
address are automatically detected.

IO=2E0h; IRQ=11
Serial Port I/O port address is 2E0h and the
interrupt address is IRQ11

IO=3E8h;
IRQ=10,11
Serial Port I/O port address is 3E8h and the
interrupt address is IRQ10,11

IO=2E8h;
IRQ=10,11
Serial Port I/O port address is 2E8h and the
interrupt address is IRQ10,11

IO=2D0h;
IRQ=10,11
Serial Port I/O port address is 2D0h and the
interrupt address is IRQ10,11

IO=2E0h;
IRQ=10,11
Serial Port I/O port address is 2E0h and the
interrupt address is IRQ10,11

Serial Port Mode [RS232]
Use the Serial Port Mode option to select the Serial Port 6 signaling mode.

RS232 D
EFAULT
Serial Port 6 signaling mode is RS-232

RS485 Serial Port 6 signaling mode is RS-485

RS422 Serial Port 6 signaling mode is RS-422