IEI Technology TANK-880-Q370 Series User Manual Download Page 77

Page: 77 / 120

TANK-880-Q370

Page 67

5.3.11 iEi Feature

Use the

iEi Feature

menu (

BIOS Menu 15

) to configure the iEi features.

Advanced

iEi Feature

Auto Recovery Function

[Disabled]

Auto Recovery Function

Reboot and recover

system automatically

within 10 min, when OS

crashes. Please install

Auto Recovery API

service before enabling

this function.

---------------------



: Select Screen

↑

↓

: Select Item

Enter Select

+/-: Change Opt.

F1: General Help

F2: Previous Values

F3: Optimized Defaults

F4: Save & Exit

ESC: Exit

BIOS Menu 15: iEi Feature



Auto Recovery Function [Disabled]

Use

Auto Recovery Function

option to enable or disable the auto recovery function.



Disabled

DEFAULT

Disabled the auto recovery function



Enabled

Enabled the auto recovery function

Summary of Contents for TANK-880-Q370 Series

























































































































Search results

Summary of Contents for TANK-880-Q370 Series

Reviews:

Related manuals for TANK-880-Q370 Series

Brands by name

Popular brands

IEI Technology TANK-880-Q370 Series, User Manual

Search results

Summary of Contents for TANK-880-Q370 Series

Reviews:

Related manuals for TANK-880-Q370 Series

Brands by name

Popular brands