TANK-801 Em b e d d e d S ys te m
P a g e 27
9
Shell
5
GND
Table 3-1: DIO Connector Pinouts
3.7.6
Dis p la yP o rt Co n n e c to r
The DisplayPort connector transmits a digital signal to compatible DisplayPort display
devices such as a TV or computer screen. To connect the DisplayPort cable to the
TANK-801, follow the steps below.
S te p 1:
Locate the DisplayPort connector
. The location is shown in
Chapter 3
.
S te p 2:
Align the connector.
Align the DisplayPort connector with the DisplayPort port.
Make sure the orientation of the connector is correct.
Figure 3-16: DisplayPort Connection
S te p 3:
Insert the DisplayPort connector.
Gently insert the DisplayPort connector. The
connector should engage with a gentle push. If the connector does not insert
easily, check again that the connector is aligned correctly, and that the connector
is being inserted with the right way up.
3.7.7
DVI Co n n e c to r
The TANK-801 has one female DVI-I connector on the front panel. The DVI connectors
are connected to digital display devices. To connect a digital display device to the
TANK-801, please follow the instructions below.
Summary of Contents for TANK-801-BT
