IEI Technology TANK-720, User Manual

Page: 35 / 118

TANK -720 E mbedded S ys tem
P age 22
3.7 S O-DIMM Ins tallation
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the TANK-720. Please make sure the purchased SO-DIMM complies
with the memory specifications of the TANK-720.
To install a SO-DIMM into a SO-DIMM socket, please follow the steps below.
S tep 1:
Remove the bottom panel by removing the five retention screws from the bottom
panel ( Figure 3-1 ).
S tep 2:
Unplug the SATA signal and power cables connected to the TANK-720, and then
place the bottom panel on a flat surface.
S tep 3:
Locate the SO-DIMM socket on the motherboard ( Figure 3-9 ).
Figure 3-9: SO-DIMM Socket
S tep 4:
Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a
way that the notch in the middle of the SO-DIMM must be aligned with the
plastic bridge in the socket ( Figure 3-10 ).