IEI Technology TANK-700-QM67W-MRAY, User Manual

Page: 29 / 96

TANK-700-QM67W-MRAY Em b e d d e d S ys te m
P a g e 20
S te p 5:
Push the SO-DIMM into the socket at an angle ( Figure 3-8 ).
Figure 3-8: SO-DIMM Installation
S te p 6:
Gently pull the arms of the SO-DIMM socket out and push the rear of the
SO-DIMM down ( Figure 3-8 ).
S te p 7:
Release the arms on the SO-DIMM socket. They clip into place and secure the
SO-DIMM in the socket.
S te p 8: Install the bracket that was previously removed in the same position it was
before.
S te p 9: Reinstall the bottom panel to the TANK-700-QM67W-MRAY.
3.6 Mo u n tin g th e S ys te m with Mo u n tin g Bra c ke ts
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
S te p 1:
Turn the embedded system over.
S te p 2:
Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the bottom surface ( Figure 3-9 ).