IEI Technology TANK-620-ULT3, User Manual

Page: 30 / 117

TANK-620-ULT3 Embedded System
Page 19
3.4.5 Power Input, 3-pin Terminal Block
The power connector connects the leads of a 9 V~36 V DC power supply into the terminal
block. Make sure that the power and ground wires are attached to the correct sockets of
the connector.
Figure 3-10: 3-pin Terminal Block
3.4.6 Serial Port Connectors
Serial port devices can be attached to the DB-9 ports on the rear panel.
Step 1: Locate the DB-9 connector . The locations of the DB-9 connectors are shown
in Figure 1-3 .
Step 2: Insert the serial connector . Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See Figure 3-11 .
Figure 3-11: Serial Device Connector