IEI Technology SPCIE-C246, User Manual

Page: 126 / 142

SPCIE-C246 Full-size PICMG 1.3 CPU Card
Page 112

Auto Recovery Function [Disabled] ................................................................................... 88

VT-d [Disabled] ..................................................................................................................... 90

Primary Display [Auto] ........................................................................................................ 92

Internal Graphics [Enabled] ................................................................................................ 92

DVMT Pre-Allocated [32M] .................................................................................................. 92

DVMT Total Gfx Mem [MAX] ................................................................................................ 92

Primary IGFX Boot Display [VBIOS Default] ..................................................................... 93

PEG Link Width Configuration [1 x16] ............................................................................... 93

Enable Root Port [Enabled] ................................................................................................ 94

Max Link Speed [Auto] ........................................................................................................ 94

Restore AC Power Loss [Last State] ................................................................................. 95

Power Saving Function(ERP) [Disabled] ........................................................................... 95

USB Power SW1 [+5V DUAL] .............................................................................................. 95

USB Power SW2 [+5V DUAL] .............................................................................................. 95

PCIe Speed [Auto] ................................................................................................................ 98

Detect Non-Compliance Device [Disabled] ....................................................................... 98

SATA Controller(s) [Enabled] ............................................................................................. 99

SATA Mode Selection [AHCI] ............................................................................................100

PCIe Storage Dev On Port 21 ............................................................................................100

Hot Plug ..............................................................................................................................100

HD Audio [Enabled] ...........................................................................................................101

Administrator Password ...................................................................................................102

User Password ...................................................................................................................102

Bootup NumLock State [On] .............................................................................................103

Quiet Boot [Enabled] .........................................................................................................104

UEFI Boot [Disabled] .........................................................................................................104

Launch PXE OpROM [Disabled] .......................................................................................104

Option ROM Messages [Force BIOS] ...............................................................................104

Save Changes and Reset ..................................................................................................105

Discard Changes and Reset .............................................................................................105

Restore Defaults ................................................................................................................105

Save as User Defaults .......................................................................................................105

Restore User Defaults .......................................................................................................105