IEI Technology PUZZLE-IN005 User Manual Download Page 29

Page: 29 / 106

PUZZLE-IN005

Page 29

3.7 IEI Networking Module Installation

The PUZZLE-IN005 allows installation of eight IEI PulM networking modules. To install a

networking module, please follow the steps below.

Step 1:

Disconnect all power sources from the system.

NOTE:

To install or replace the

networking module, the power supply must be fully disconnected before

installation.

Step 2:

Loosen the two screws indicated below. Grab the screws and pull the slot cover

all the way out to remove it.

Figure 3-9: Networking Module Slot Cover Screws

Step 3:

Slide an IEI networking module into the slot until the module is seated in the slot

correctly and securely. Fasten the two screws on the networking module to

secure the module to the chassis.

Summary of Contents for PUZZLE-IN005











































































































Search results

Summary of Contents for PUZZLE-IN005

Reviews:

Related manuals for PUZZLE-IN005

Brands by name

Popular brands

IEI Technology PUZZLE-IN005, User Manual

Search results

Summary of Contents for PUZZLE-IN005

Reviews:

Related manuals for PUZZLE-IN005

Brands by name

Popular brands