IEI Technology PUZZLE-IN004 Series, User Manual, Page: 47 / 102

PUZZLE-IN004
Page 37
Figure 3-17: Remove SSD from the Bracket
Step 4: Insert a new SSD into the bracket until the SSD is properly connected to the
SATA connector. Secure the SSD with the four retention screws removed
previously.
Step 5: Re-connect the SATA connector module to the motherboard. Make sure the two
positioning studs on the chassis go through the two small holes on the SSD
bracket ( Figure 3-18 ). Secure the bracket to the chassis with three screws
removed previously.
Figure 3-18: SSD Installation
Step 6: Re-install and secure the top cover to the system.