IEI Technology PUZZLE-A002, User Manual, Page: 34 / 87

PUZZLE-A002
Page 24
3.9 Console Connection
The PUZZLE-A002 has one RJ-45 serial device connector on the front panel. The RJ-45
connector for the serial port can be identified easily as the RJ-45 for the network has two
LEDs on the port, while the connectors for the serial cables don’t. The pinouts of the serial
port are listed below.
Pin Description Pin Description
1 -NRTS1 5 GND
2 -NDTR1 6 NSIN1
3 NSOUT1 7 -NDSR1
4 GND 8 -NCTS1
Table 3-3: RJ-45 Serial Port Pinouts
The serial device slot (RJ-45) connects to a cable with a standard D-sub 9 connector or a
USB connector (varied from SKU) at the other end.
3.10 Mounting the System
The PUZZLE-A002 is shipped with two mounting brackets that support 1U rack mount. To
install the mounting brackets, please follow the steps below.
Step 1: Align the three retention screw holes in each bracket with the corresponding
retention screw holes on the sides of the PUZZLE-A002.
Step 2: Secure the brackets to the system by inserting three retention screws (M4*6)
into each bracket ( Figure 3-13 ). Make sure the screws are tight and on the right
positions.
Figure 3-13: Rack Mounting Bracket Installation